An ultra-lightweight, zero-dependency package for very fast calculation of geodesic distances. Main eponymous function, geodist(), accepts only one or two primary arguments, which must be rectangular objects with unambiguously labelled longitude and latitude columns (that is, some variant of lon/lat, or x/y).
n <- 50
x <- cbind (-10 + 20 * runif (n), -10 + 20 * runif (n))
y <- cbind (-10 + 20 * runif (2 * n), -10 + 20 * runif (2 * n))
colnames (x) <- colnames (y) <- c ("x", "y")
d0 <- geodist (x) # A 50-by-50 matrix
d1 <- geodist (x, y) # A 50-by-100 matrix
d2 <- geodist (x, sequential = TRUE) # Vector of length 49
d2 <- geodist (x, sequential = TRUE, pad = TRUE) # Vector of length 50Installation
You can install latest stable version of geodist from CRAN with:
install.packages ("geodist") # current CRAN versionAlternatively, current development versions can be installed using any of the following options:
# install.packages("remotes")
remotes::install_git ("https://git.sr.ht/~mpadge/geodist")
remotes::install_git ("https://codeberg.org/hypertidy/geodist")
remotes::install_bitbucket ("hypertidy/geodist")
remotes::install_gitlab ("hypertidy/geodist")
remotes::install_github ("hypertidy/geodist")Then load with
library (geodist)
packageVersion ("geodist")
#> [1] '0.1.0.6'Detailed Usage
Input(s) to the geodist() function can be in arbitrary rectangular format.
n <- 1e1
x <- tibble::tibble (
x = -180 + 360 * runif (n),
y = -90 + 180 * runif (n)
)
dim (geodist (x, measure = "haversine"))
#> [1] 10 10
y <- tibble::tibble (
x = -180 + 360 * runif (2 * n),
y = -90 + 180 * runif (2 * n)
)
dim (geodist (x, y, measure = "haversine"))
#> [1] 10 20
x <- cbind (
-180 + 360 * runif (n),
-90 + 100 * runif (n),
seq (n), runif (n)
)
colnames (x) <- c ("lon", "lat", "a", "b")
dim (geodist (x, measure = "haversine"))
#> [1] 10 10All outputs are distances in metres, calculated with a variety of spherical and elliptical distance measures. Distance measures currently implemented are Haversine, Vincenty (spherical and elliptical)), the very fast mapbox cheap ruler (see their blog post), and the “reference” implementation of Karney (2013), as implemented in the package sf. (Note that geodist does not accept sf-format objects; the sf package itself should be used for that.) The mapbox cheap ruler algorithm is intended to provide approximate yet very fast distance calculations within small areas (tens to a few hundred kilometres across).
Benchmarks of geodesic accuracy
The geodist_benchmark() function - the only other function provided by the geodist package - compares the accuracy of the different metrics to the nanometre-accuracy standard of Karney (2013).
geodist_benchmark (lat = 30, d = 1000)
#> haversine vincenty cheap
#> absolute 0.818681120 0.818681120 0.57910408
#> relative 0.002173428 0.002173428 0.00160801All distances (d) are in metres, and all measures are accurate to within 1m over distances out to several km (at the chosen latitude of 30 degrees). The following plots compare the absolute and relative accuracies of the different distance measures implemented here. The mapbox cheap ruler algorithm is the most accurate for distances out to around 100km, beyond which it becomes extremely inaccurate. Average relative errors of Vincenty distances remain generally constant at around 0.2%, while relative errors of cheap-ruler distances out to 100km are around 0.16%.
Performance comparison
The following code demonstrates the relative speed advantages of the different distance measures implemented in the geodist package.
n <- 1e3
dx <- dy <- 0.01
x <- cbind (-100 + dx * runif (n), 20 + dy * runif (n))
y <- cbind (-100 + dx * runif (2 * n), 20 + dy * runif (2 * n))
colnames (x) <- colnames (y) <- c ("x", "y")
rbenchmark::benchmark (
replications = 10, order = "test",
d1 <- geodist (x, measure = "cheap"),
d2 <- geodist (x, measure = "haversine"),
d3 <- geodist (x, measure = "vincenty"),
d4 <- geodist (x, measure = "geodesic")
) [, 1:4]
#> test replications elapsed relative
#> 1 d1 <- geodist(x, measure = "cheap") 10 0.070 1.0
#> 2 d2 <- geodist(x, measure = "haversine") 10 0.133 1.9
#> 3 d3 <- geodist(x, measure = "vincenty") 10 0.224 3.2
#> 4 d4 <- geodist(x, measure = "geodesic") 10 2.856 40.8Geodesic distance calculation is available in the sf package. Comparing computation speeds requires conversion of sets of numeric lon-lat points to sf form with the following code:
x_to_sf <- function (x) {
sapply (seq_len (nrow (x)), function (i) {
sf::st_point (x [i, ]) |>
sf::st_sfc ()
}) |>
sf::st_sfc (crs = 4326)
}Distances in sf are by default calculated via s2::s2_distance(), with alternative calculations using the same geodesic algorithm as here.
n <- 1e2
x <- cbind (-180 + 360 * runif (n), -90 + 180 * runif (n))
colnames (x) <- c ("x", "y")
xsf <- x_to_sf (x)
sf_dist <- function (xsf, s2 = TRUE) {
if (s2) {
sf::sf_use_s2 (TRUE) # s2::s2_distance()
} else {
sf::sf_use_s2 (FALSE) # Karney's geodesic algorithm
}
sf::st_distance (xsf, xsf)
}
geo_dist <- function (x) geodist (x, measure = "geodesic")
rbenchmark::benchmark (
replications = 10, order = "test",
sf_dist (xsf, s2 = TRUE),
sf_dist (xsf, s2 = FALSE),
geo_dist (x)
) [, 1:4]
#> Spherical geometry (s2) switched off
#> Linking to GEOS 3.13.0, GDAL 3.10.0, PROJ 9.5.0; sf_use_s2() is FALSE
#> Spherical geometry (s2) switched on
#> Spherical geometry (s2) switched off
#> test replications elapsed relative
#> 3 geo_dist(x) 10 0.062 1.000
#> 2 sf_dist(xsf, s2 = FALSE) 10 0.207 3.339
#> 1 sf_dist(xsf, s2 = TRUE) 10 0.146 2.355The geosphere package also offers sequential calculation which is benchmarked with the following code:
fgeodist <- function () geodist (x, measure = "vincenty", sequential = TRUE)
fgeosph <- function () geosphere::distVincentySphere (x)
rbenchmark::benchmark (
replications = 10, order = "test",
fgeodist (),
fgeosph ()
) [, 1:4]
#> test replications elapsed relative
#> 1 fgeodist() 10 0.017 1.000
#> 2 fgeosph() 10 0.037 2.176geodist is thus at least twice as fast as both sf for highly accurate geodesic distance calculations, and geosphere for calculation of sequential distances.
Contributors
All contributions to this project are gratefully acknowledged using the allcontributors package following the allcontributors specification. Contributions of any kind are welcome!
Issue Authors
 edzer |
 marcosci |
 mem48 |
 dcooley |
 Robinlovelace |
 espinielli |
 Maschette |
